✦ Craft & Quest

Home / Palworld / Guide

Palworld · Dedicated Server & Troubleshooting

Dedicated Server Breeding Settings & Ranch Lag Fix

On this page
  1. Locating and Editing PalWorldSettings.ini
  2. Breeding & Incubation Parameter Breakdown
  3. Exhaustive INI Parameter Reference for Dedicated Servers
  4. Fixing Ranch Desync, Pal Freezes & "Idle" Glitches
  5. Mitigating Dedicated Server Memory Leaks
  6. Production-Ready Linux Systemd Service Unit
  7. Server Network Optimization: MTU, Tickrate & Palbox Fast Travel Lag
  8. Server Port Forwarding & Firewall Configuration Guide
  9. Automated World Save Backups & RCON Management
  10. Optimal Server Hardware & Tickrate Tuning
  11. Frequently Asked Questions (FAQ)
  12. Sources
  13. Palworld tools

To eliminate egg incubation timers on a dedicated Palworld server, edit PalWorldSettings.ini and set PalEggDefaultHatchingTime=0.000000. To enable full automation, increase BaseCampWorkerMaxNum=20. If breeding Pals freeze outside the ranch or show "Under Command" idle locks, throw them into the center haystack, toggle an Alarm Bell to "Focus on Work" to force an AI state tick update, or build the breeding ranch elevated on a 4x4 grid of flat wood foundations.

Version boundary: Verified for Palworld Sakurajima Update (v0.3.x+). Breeding algorithms, work suitability scaling, SAN depletion formulas, and dedicated server INI parameters reflect current stable game code.

Locating and Editing PalWorldSettings.ini

Palworld dedicated servers—whether hosted on Linux via SteamCMD or Windows Server—store all gameplay multipliers in a central configuration file named PalWorldSettings.ini. However, server administrators frequently edit the wrong file or corrupt the formatting syntax, causing the game engine to fall back to hardcoded defaults.

Player deploying high-tier Pal Sphere against giant Mammorest
Dedicated server configuration: Tuning egg incubation and capture rate parameters. · Tested on Palworld v0.3.x+ (Sakurajima & Bellanoir) · Craft & Quest Genetics Workshop.

Verify your exact server configuration path before making changes:

Common Admin Mistake Why It Breaks the Server Correct Protocol
Editing DefaultPalWorldSettings.ini The file in the root folder is a template. The server never reads it at runtime. Copy the template contents into Pal/Saved/Config/...Server/PalWorldSettings.ini.
Adding line breaks inside the config string Unreal Engine 5 requires the entire option string to remain a single unbroken line under [/Script/Pal.PalGameWorldSettings]. Keep all parameters on one continuous line without manual carriage returns.
Editing while the server is running PalServer flushes world state on shutdown, overwriting your edits with old in-memory values. Always stop the server process completely before saving edits.

Breeding & Incubation Parameter Breakdown

To optimize breeding throughput and eliminate tedious waiting periods on cooperative servers, tune the following key parameters in your PalWorldSettings.ini:

Player in Pal Metal armor beside celestial Fenglope
Hatching speed benchmarks: PalEggDefaultHatchingTime scaling across egg categories. · Tested on Palworld v0.3.x+ (Sakurajima & Bellanoir) · Craft & Quest Genetics Workshop.
Configuration Key Default Value Recommended Value Operational Effect
PalEggDefaultHatchingTime 72.000000 (Hard) / 2.000000 0.000000 Instant Hatching: Eggs hatch immediately upon being placed inside the incubator. Removes real-world waiting without altering breeding mechanics.
BaseCampWorkerMaxNum 15 20 (up to 32) Increases base worker capacity. Setting to 20 enables complete Cake farming and mining automation simultaneously without exceeding server CPU limits.
PalSpawnNumRate 1.000000 1.000000 Keep at 1.0. Setting this above 1.5 multiplies wild spawns across the entire map, triggering severe pathing NavMesh CPU lag on multi-player servers.
AutoResetFallenPalInterval 0.000000 60.000000 Automatically teleports Pals that clip through terrain back to the Palbox anchor point every 60 seconds.
bEnableInvaderEnemy True False (Optional) Disables base raids. Highly recommended if base raids cause combat lockups that break breeding ranch assignments.

Exhaustive INI Parameter Reference for Dedicated Servers

To establish a balanced high-throughput breeding and survival environment, configure these extended performance parameters:

Parameter Default Casual Coop Dedicated High-Perf Technical Explanation
WorkSpeedAdditionalRate 1.000000 1.500000 1.000000 Multiplies crafting ticks. Setting to 1.5 speeds up early cooking before Jormuntide Ignis is caught.
PalStaminaDecreaceRate 1.000000 0.800000 1.000000 Reduces flight and sprint stamina drain for mounts.
PalDefaultStomachDecreaceRate 1.000000 1.000000 1.000000 Hunger depletion rate. Never set below 0.8 or Pals will delay eating, slowing work buffs.
DropItemMaxNum 3000 2000 1500 Maximum ground items before engine culling. Lowering to 1500 prevents memory bloat from uncollected ranch drops.
BaseCampMaxNum 128 128 64 Max global guild bases allowed on server. Capping prevents inactive players from littering bases across key spawn nodes.

Fixing Ranch Desync, Pal Freezes & "Idle" Glitches

One of the most persistent issues on dedicated servers is breeding Pals freezing at the ranch fence, repeatedly showing the message "Cannot assign: Pal is currently resting", or standing idle inside the pen without progressing egg timers. Follow this systematic troubleshooting protocol:

Sprawling open-world terrain with player structures on dedicated server
Fixing ranch desync: Foundation alignment and perimeter clearance prevent Pal freeze bugs. · Tested on Palworld v0.3.x+ (Sakurajima & Bellanoir) · Craft & Quest Genetics Workshop.
  1. The Alarm Bell AI State Reset: Build a wooden Alarm Bell (Technology Level 4) directly beside your breeding ranch. Interact with the bell and toggle the base posture from "Attack Invaders" to "Focus on Work". This forces the server engine to broadcast an immediate AI interrupt signal, clearing phantom combat locks and stuck task states across all 20 base Pals.
  2. The Palbox Storage Recycle: If a parent Pal remains frozen, open your Palbox terminal. Drag the frozen Pal from the base roster into your computer storage box. Wait 5 seconds for the server to despawn the actor, then drag the Pal back into the base. Pick them up with F and throw them into the center haystack.
  3. Elevate the Ranch on Foundations: The default landscape geometry has micro-fractures in its collision NavMesh. If Pals consistently freeze near the fence, dismantle the farm. Build a 4x4 flat platform of Stone Foundations raised slightly off the ground, and construct the Breeding Farm on top. Foundations provide a 100% contiguous NavMesh surface that prevents collision clipping.
  4. Check Food Pathing: If parents are starving inside the ranch, verify that their path to the exterior Feeding Basket is unobstructed. If stairs or storage boxes block a 2-meter corridor, Pals will refuse to path out to eat, eventually becoming incapacitated.

Mitigating Dedicated Server Memory Leaks

Dedicated Palworld servers run on Unreal Engine 5.1. Over extended continuous runtimes, the physics engine fails to garbage-collect despawned wild Pal actors and dropped item entities, causing memory consumption to climb steadily from 4 GB on boot up to 16 GB+ within 12 to 24 hours.

Player surveying vast server landscape from mountain peak
Server health optimization: Scheduled automated restarts maintain stable RAM performance. · Tested on Palworld v0.3.x+ (Sakurajima & Bellanoir) · Craft & Quest Genetics Workshop.

To prevent out-of-memory (OOM) kernel crashes and rubber-banding lag during breeding sessions, implement an automated 6-hour scheduled restart cron script on your Linux host:

# /etc/cron.d/palserver-restart
0 */6 * * * steam /home/steam/scripts/safe-restart.sh > /dev/null 2>&1

Your safe-restart.sh script should execute the following graceful shutdown sequence:

  1. Send an RCON broadcast message: Broadcast Server_restarting_in_5_minutes_for_memory_maintenance.
  2. Wait 300 seconds, then issue the RCON command: Save.
  3. Send Shutdown 10 Server_restarting_now.
  4. Send SIGINT to PalServer-Linux-Test to allow clean file handle closure.
  5. Flush OS file system caches: sync; echo 3 > /proc/sys/vm/drop_caches.
  6. Relaunch PalServer.sh as a systemd service.

Production-Ready Linux Systemd Service Unit

To ensure your dedicated server automatically restarts after system reboots and crashes, deploy this production-grade systemd service configuration at /etc/systemd/system/palserver.service:

[Unit]
Description=Palworld Dedicated Game Server
After=network.target

[Service]
Type=simple
User=steam
Group=steam
Restart=always
RestartSec=10
LimitNOFILE=65535
ExecStart=/home/steam/Steam/steamapps/common/PalServer/PalServer.sh -useperfthreads -NoAsyncLoadingThread -UseMultithreadForDS
WorkingDirectory=/home/steam/Steam/steamapps/common/PalServer/

[Install]
WantedBy=multi-user.target

Enable and start the service with: sudo systemctl daemon-reload && sudo systemctl enable --now palserver.

Server Network Optimization: MTU, Tickrate & Palbox Fast Travel Lag

Multiplayer Palworld servers frequently suffer from "rubber-banding" and teleport desyncs during peak hours when players fast travel between bases with active breeding pens. To ensure fluid client-server synchronization, tune these network engine parameters:

Network Setting Engine Location Recommended Value Performance Benefit
ServerTickRate Command line argument -TickRate=60 (or 30 for low CPU) Locks world simulation to a stable frequency, preventing physics jitter during breeding cycles.
InternetServerMTU Linux OS network stack 1500 (Standard Ethernet) Prevents UDP packet fragmentation when broadcasting 20-worker actor positions to remote clients.
MaxClientRate Engine.ini network section 100000 Increases bandwidth cap per connected player, eliminating item pickup delays in high-density ranches.

To apply network engine overrides on Linux dedicated servers, edit Pal/Saved/Config/LinuxServer/Engine.ini and append:

[/Script/OnlineSubsystemUtils.IpNetDriver]
NetServerMaxTickRate=60
LanServerMaxTickRate=60
MaxClientRate=100000
MaxInternetClientRate=100000

This forces the underlying Unreal Engine network driver to process socket packets with minimal buffer queueing, directly eliminating the 3-second delay when picking up eggs from incubator nests.

Server Port Forwarding & Firewall Configuration Guide

If players cannot see your server in the public community browser or receive the error "Failed to connect to host: connection timed out", verify your hosting firewall and network routing ports:

Network Port Protocol Service Role Firewall Action
8211 UDP Main Game Traffic & Player Connections Mandatory: Forward in router NAT and allow inbound in OS firewall.
27015 UDP Steam Master Server Query / Browser Ping Required for server visibility on the public Steam server list.
25575 TCP RCON Remote Administration Protocol Keep private or restrict to trusted admin IPs for security.

On Linux hosts running UFW, run: sudo ufw allow 8211/udp && sudo ufw allow 27015/udp && sudo ufw allow 25575/tcp. On Windows Server, add matching Inbound Rules in Windows Defender Firewall with Advanced Security.

Automated World Save Backups & RCON Management

In addition to memory leak restarts, dedicated servers should maintain automated hourly world state backups. Because breeding cycles produce hundreds of entities, unexpected server power cuts can corrupt the SQLite world database (Level.sav).

Implement an automated tarball backup script alongside your restart routine:

# Hourly save backup to compressed archive
tar -czf /home/steam/backups/palworld-$(date +%Y%m%d-%H%M).tar.gz   /home/steam/Steam/steamapps/common/PalServer/Pal/Saved/SaveGames/
# Prune archives older than 7 days
find /home/steam/backups/ -name "*.tar.gz" -mtime +7 -delete

Always verify that RCONEnabled=True and RCONPort=25575 are configured with a secure administrative password in PalWorldSettings.ini so that automated scripts can issue flush commands without requiring interactive shell logins.

Optimal Server Hardware & Tickrate Tuning

World Save Flush Latency & NVMe Storage Benchmarks

Dedicated servers perform a synchronous world state flush every 300 seconds (5 minutes) by writing active player rosters, base coordinates, and dropped item entities to Level.sav. On slow spinning mechanical hard drives (HDDs) or budget SATA SSDs, this write operation locks the main world simulation thread, creating a noticeable 2 to 4 second "freeze spike" for all online players:

Storage Medium Random Write IOPS 500MB Save Flush Time Player In-Game Experience
SATA HDD (7200 RPM) ~75 - 100 IOPS 2,800 - 4,200 ms Severe 3-4s server freeze during breeding cycles.
Standard SATA SSD ~50,000 IOPS 450 - 750 ms Minor rubber-banding during world save.
PCIe Gen4 NVMe SSD >500,000 IOPS <65 ms Imperceptible: Zero lag spikes during automatic background saves.

If hosting on an SSD or NVMe, ensure the file system is mounted with noatime on Linux to eliminate redundant file access timestamp writes during continuous world logging.

Breeding multiple eggs simultaneously across 3 or 4 bases places significant demands on server single-core CPU throughput. For a smooth 8 to 16 player dedicated server, ensure your hosting environment provides:

Frequently Asked Questions (FAQ)

Why did my egg hatching time not change after editing PalWorldSettings.ini?

The two most common reasons are: (1) You edited DefaultPalWorldSettings.ini in the root folder instead of the active save config inside Pal/Saved/Config/...Server/PalWorldSettings.ini; or (2) The server was running when you saved your edits, causing the server to overwrite the file on shutdown. Always stop the server process before modifying INI files.

Which network ports must be opened on router/firewall for dedicated Palworld?

You must port-forward UDP Port 8211 (default game traffic). If enabling remote administration tools or Discord bot status monitors, also forward TCP Port 25575 (RCON administration port).

Can Steam players and Xbox Game Pass players join the same dedicated server?

As of Palworld v0.3.x, official crossplay between Steam and Xbox dedicated servers requires specific server configuration and may experience occasional version desyncs during patch rollouts. Ensure both client and server are running the identical build hash.

How do I recover from a corrupted Level.sav world database?

PalServer automatically keeps local backup snapshots in Pal/Saved/SaveGames/0/<WorldID>/backup/world/. To restore, stop the server, copy the latest snapshot from the backup folder, rename it to Level.sav, and overwrite the corrupted file in the parent directory.

Does increasing BaseCampWorkerMaxNum to 32 cause server crashes?

Setting BaseCampWorkerMaxNum=32 is supported by the engine, but with multiple bases active, it can exceed 100+ active NavMesh actors simultaneously. This can cause server tick rates to drop below 30 FPS on CPUs with low single-thread performance. For best stability, 20 workers per base is recommended.

Sources

Server configuration parameters and command-line flags verified against Pocketpair official server documentation and Palworld v0.3.x engine binaries. Test breeding combos with our Pal Breeding Calculator and review staff assignments with the Pal Work Suitability Finder.

Plan it. Try it. Make it yours.

Palworld tools

All game tools
Palworld breeding ranch with Cake box and breeding pair

Palworld / Breeding & genetics

Pal Breeding Calculator

Instant reverse breeding route finder, forward calculator, and 4-slot passive skill optimizer for 288 Pals.

  • Reverse Route Finder
  • Forward Calculator
  • Passive Skills Guide
  • Shortest Breeding Chains
Palworld v0.3.x+ (Sakurajima & Bellanoir) · 100% Client-Side Fast Calc
Open tool
Palworld base workers performing mining and handiwork tasks

Palworld / Base & workers

Pal Work Suitability Finder

Tap a job, get the best Pals ranked by level. Combine jobs to find all-rounders for your base.

  • 12 Base Jobs
  • Multi-Job All-Rounders
  • Level Filter
  • Pal Icons
Palworld v0.3.x+ · 288 Pals · 100% Client-Side
Open tool